BA1500 asphalt mixing plant is a kind of equipment used in the construction industry to produce asphalt mixture.
Designed for the production of a wide range of asphalt mixtures, including base, binder and surface courses. It can produce up to 120 tons of bitumen per hour and has a storage capacity of up to 50 tons.
BA1500 Asphalt mixing plant low operating cost: the power design of the overall thermal system adopts the European standard system combined with the accurate weighing system. The whole machine is perfectly matched in terms of fuel consumption and power use, so as to quietly save the production cost during operation.
BA1500 Asphalt mixing plant The service life and overload capacity of the asphalt concrete mixer designed and manufactured according to European standards exceed the national standards. At present, some models have been exported to Western Europe and have been widely recognized at home and abroad.
The BA1500 asphalt mixing plant is designed to be highly maneuverable and easy to install and transport. This makes it ideal for use on a wide range of construction sites, including remote locations.
Overall, the BA1500 Asphalt Mixing Plant is a quality and reliable piece of equipment ideal for producing high quality asphalt mixes for a variety of construction applications.
BA500 Asphalt Mixing Plant Technical Parameters
| Model | BA1500 Asphalt Mixing Plant |
| Type | Batch Mix / Hot Mix |
| Capacity | 125 Tons Per Hour (Standard Working Condition) |
| Mixer | 1500kg/batch |
| Fuel Consumption | Diesel consumption: 5.5-7.0 kg /ton |
| Weighing Precision | Hot aggregate ±0.5%; bitumen ±0.3%; filler:±0.2% |
| Hot Asphalt Temperature | 130℃-165℃(adjustable) |
| Air Emissions | ≤20mg/Nm³ |
| Working Noise | ≤70db(A) |
| Operation | Full Auto/Manual Operation |
| Installation Power | 347kw |
| Voltage | 220V/380V-50Hz (adjustable) |
| Plant Covering Area | Length: 43m; width: 32m; max height point: 18m |
| Total Weight | 145t |
| Documents | Lay-Out/ Electric Circuit Diagram; Chinese-English Operation Manual; Qualification Certificate |
3% of sales volume is put on R&D every year. Supported by computer-aided design systems — CAD and Solidworks, simulation analysis software — Ansy and matlab, programming software — VCC and EasyBuoder8000, BAM optimizes product research, design and production by every details to ensure accuracy, reliability and perfection of program formulation. Futhermore, BAM has integrated R&D, technical service, marketing and production to enhance R&D and innovation abilities and comprehensive competitiveness at home and abroad.
A. Environmental temperature is 20 ℃ with standard atmospheric pressure; altitude ≤2000m;
B. Average moisture content of cold aggregate <5%;
C. Hot aggregate temperature <160 ℃;
D. Finished materials is medium-grained, the stone volume-weight ≥1600kg/m3;
E. Sand content <35%;
F. The ratio of aggregate shall meet the national standard. Dust content of cold aggregate ≤3%;
G. Cold aggregate should be clean enough without too much dirt or other material. Cold aggregate gradation should be continuous;
.
H. Cold aggregate shall not contain large amounts of oversized material, otherwise it will cause blocking, resulting in reduced ability to supply aggregate;
I. Moisture content of powder must be less than 0.5%, and there should be no lumping or arching, otherwise it will cause supplying interruption or lag, which can affect the productivity;
BAM believes the value of brand, which originates from not only excellent products and solutions, but also considerate pre-sales & after-sales technical services. Thus, the team with hundreds of technical engineers is set up to provide acceptable solution for series of problems across project consultation, on-site surveys, sample analysis, program design, installation, commissioning and maintenance guidance, which ensure that every part is docking in pace with customers and reach customer’s requirement.
Warranty: 12 months after erecting the whole plant.
